1/72 Heller HAL Chetak/Alouette III

Gallery Article by Tom Thounaojam on Jan 26 2020

India Republic Day

 

      

My first, entry for 26 Jan 2020 Republic day entry.

I always wanted to build a HAL Chetak or Alouette III, I knew Heller makes a one so got a one however, the kit was crude and basic so I needed PE parts to make it look decent.

But getting the PE was difficult, I searched everywhere for PE parts for few weeks and I found a one on the EvilBay it was there on HLJ but always out of stock, bought the PE but my experience with PE was minimum.

Click on images below to see larger images

Once, I started the project, one of my friend told me (Ratish) why not build an opened one, since there is no opened Chetak, so I decided to make opened one but then, I have to pause for few weeks since I didn't have fine saw blade and after few weeks got it and start working on it, cutting clear parts was scary it was my first time and I was if I screwed up then am gone. I used thick masking tape on one side and guide and run saw the clear parts and managed to cut a satisfactory. Then I started using the PE almost rebuilt the engine as it was just too basic and clean and we know most aircraft engines are full of pipes and wires, I used masking tape as floor carpet for the cockpit and scratch few other interiors parts which is trivial to mention here.

For paint I Tamiya grey and gunze light grey and for metallic part mixed of Mr.color and Tamiya paints, I generally don't use specific paints I mix and eyeballs the colors. Here it is, it is a delicate task for me making in 72 scales, I hope it has turned out ok, thanks for looking, cheers.

Tom Thounaojam

Click on images below to see larger images

 

Photos and text by Tom Thounaojam